TWINTAPE Method™
Combine Seamless and Original for best results
Seamless is perfect for the upper sections where the fasteners may need to sit closer to the leg - the thin, seamless attachment allows them to blend in naturally. Original TwinTape has a softer, more pliable design that provides extra strength and durability, making it ideal to place under Seamless for an invisible and stable Tape.
Using both variants gives you the best of both worlds - a full, natural swell that lasts a long time without compromising on comfort or aesthetics. For a natural and long-lasting result, we recommend combining Seamless TwinTape and Original TwinTape.
How much should I order?
Pro tip! Feel free to work with full lengths and with crossed rows using our twin-tape method!
Below you can see three different variations of combinations:
Pro tip:
Buyan extra Seamless pack and work with Slimtape underneath on each side of the head at the top, perfect blending and softness in the top
row.
Buyan extra Seamless pack and work with Slimtape underneath on each side of the head at the top, perfect blending and softness in the top
row.
1.
When you want to fill out the hair (without length) = 2 bags of sensory, eg:
- 1 bag of original (which you apply underneath)
- 1 bag of seamless (which you apply over the original)
2.
When you want to fill out the hair (with length) = 4 bags of sensory, eg:
- 2 bags of original (which you apply underneath)
- 2 bags of seamless (which you apply over the original)
3.
When you want to fill out your hair (with length and want it very full) = 6 bags of sensory, eg:
- 3 bags of original (which you apply underneath)
- 3 bags of seamless (which you apply over the original)
Insertion of TwinTape
Step-by-step
1
Start by measuring and placing the row from the hairline backwards.
2
Work with thin passes and section the hair into three sections.
3
Place the customer's hair on the TwinTape row. Always start with the bottom row.
4
Open only 2-3 cm of the tape strip at a time and continue section by section.
5
Once the bottom row is in place, place the top row on top and press firmly.
6
For single rows: use SlimTape under Seamless/Original.
This is an example of how to work with crossed rows.
Tip: TwinTape rows can be cut from above if they are too long.
Turnover guide
Step-by-step guide: Removal & Reapplication of Sensory Extensions
1
Step 1: Apply remover
- Spray remover on top of the row and down between the brackets.
- Spray a little extra at the edge to dissolve the tape.
2
Step 2: Open up the brackets
- Using a tail comb, gently press down at the edge between the two strips of tape.
- Start opening up the bracket by lifting it 1 cm at a time.
- Apply more remover as you go to soften the tape.
3
Step 3: Remove the weft
- When the fasteners start to loosen, spray some more remover.
- Gently pull the weft away in small steps.
4
Step 4: Clean hair & attachments
- Spray remover on any tape residue in the hair.
- Carefully comb off the residue with a stick comb.
5
Step 5: Prepare for reapplication
- Remove the old tape from the weft.
- Apply new Duplex Tape to the bracket.
6
Step 6: Reapply using the Twintape method
- Now you're ready to rewrap your weft with our awesome Twintape method!
Care advice
Step-by-step
When you have a hair extension, it is important to take care of it in the best possible way. Here are some simple step-by-step instructions on how to wash your extensions in the best way. We recommend washing your extensions about 2-3 times a week, but it all depends on how much you exercise or how greasy your hair gets. Remember that no tape can withstand too much sweat, grease or oil. If in doubt, it's better to wash your extensions once too often than once too little. We sell customized products here in the shop for the best durability.
1
Before getting into the shower, start by brushing through your hair to get rid of any knots. Always brush from the lengths to the top. Do not pull your hair.
2
Apply Shampoo to wet hair, making sure to distribute it evenly and between extensions Tape. Massage and rinse thoroughly. Never rub in the lengths and stand straight up in the shower. Use slightly cooler water.
3
Massage the wrap into towel-dried lengths, leave on for 5-15 minutes for best results. Avoid extension Tape. (1 minute is better than none instead of skipping this step).
4
Massage the conditioner into damp hair, avoiding extension Tape. Rinse lightly.
5
Finish with leave-in creme and heat protection as a final step in your hair care routine.
6
It is very important to use a hair dryer and dry the extension attachments completely, as the tape will be affected if it is wet/damp for a long time.
Never use too hot on your heating tools, it will cause wear and tear and the color of your loose hair may fade/burn off.
Also remember to: Move up your sensory value hair extensions after 6-9 weeks, depending on your own hair growth.
Always wear your hair in a ponytail or braid when you sleep. Feel free to use a silk cap so as not to tear or damage the hair extension when you sleep. It prevents friction against the hair extension.
Never use too hot on your heating tools, it will cause wear and tear and the color of your loose hair may fade/burn off.
Also remember to: Move up your sensory value hair extensions after 6-9 weeks, depending on your own hair growth.
Always wear your hair in a ponytail or braid when you sleep. Feel free to use a silk cap so as not to tear or damage the hair extension when you sleep. It prevents friction against the hair extension.
Color map
1 Metal
2a Backstage
6 Pulses
3 Rebel
33 Flame
1b Mane
1a Bonnie
2 Eclipse
4 Punk
5 Ash
7 Punk
9 patches
10 Edge
12 Storm
20 Vibe
27 Twist
30 Raw
1001 Thunder
Steel Silver
6/24 Voltage
613/18A Highlights
613/24 Voodoo
RA Iron
RM Blaze
PR Fade
SRN Moonlit
DU Bronze
BM Whiskey
UN Swirl
